|Place of Origin:||China|
|Brand Name:||Dahua Sling|
|Certification:||OSHA regulations WSTDA standard|
|Model Number:||endless sling|
|Minimum Order Quantity:||1000 pcs|
|Price:||USD 30,000 / 20'GP|
|Logo:||We Do It Oursleves||Material:||100 % Polyester|
|Layer::||1 Layer||Packing:||Blank Or Printed|
|Sling Type:||Endless Flat Webbing Sling||W.L.L:||1000KG|
endless webbing sling,
flat endless belt
En1492-1 White Polyester Crane Endless Lifting Slings 2 Ton Industria Flat Webbing Slings
All our lifting slings and lifting straps are made of highly durable, heavy-duty polyester webbing. These lifting slings (sometimes called lifting straps) are in stock in numerous widths and lengths. Slings come in various styles: flat eye and eye, twisted eye, endless, and endless round to meet your specific application.
High quality fully certified Endless Flat Belt Webbing Slings are manufactured to your requirements. Easy to use in many different formats.
1,000kg sling width = 30mm PURPLE
2,000kg sling width = 60mm GREEN
-For larger sizes please contact our friendly sales team who will advise costs and lead times.
When using flat woven webbing slings always:
• Store and handle belt slings correctly.
• Inspect belt slings and accessories before use and before placing into storage.
• Follow safe slinging practices, as given overleaf.
• Position the bight for choke lift at 120° (natural angle).
• Position the sling so that the load is uniformly spread over its width and protect the sling from sharp edges.
• Apply the correct mode factor for the slinging arrangement.
When using flat woven webbing slings never:
• Attempt to shorten, knot or tie belt slings.
• Expose belt slings to direct heat or flames.
• Use belt slings at temperatures above 80°C or below 0°C without consulting the supplier.
• Expose belt slings to chemicals without consulting the supplier.
• Shock load belt slings.
• Use belt slings which are cut or which have loose or damaged stitching
Selecting the Correct Sling
Belt slings are available in a range of materials and sizes in single leg and endless sling forms. Select the slings to
be used and plan the lift taking the following into account:
Polyester is resistant to moderate strength acids but is damaged by alkalis; polyamide (Nylon) is virtually immune to
alkalis but is damaged by acids; and polypropylene is little affected by acids or alkalis but is damaged by some
solvents, tars and paints.
The sling must be both long enough and strong enough for the load and the slinging method. Apply the mode factor
for the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. If
the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or
greater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely, select a sling
fitted with protective sleeves and/or use suitable packing.
Using Belt Slings Safely
Do not attempt lifting operations unless you understand the use of the equipment, the slinging procedures and the
mode factors to be applied. Do not use defective slings or accessories. Check the correct engagement with fittings
and appliances, ensure smooth radii are formed, do not twist or cross slings and do not overcrowd fittings. Position
the sling so that the load is uniformly spread over its width. Position the bight for a choke lift at the natural (120°)
angle to prevent friction being generated. Ensure that stitching is in the standing part of the sling away from hooks
and other fittings. Take the load steadily and avoid shock loads. Do not leave suspended loads unattended. In an
emergency cordon off the area.
In-service Inspection, Maintenance and Replacement
Inspect slings each day before use, looking for:
Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.
Contact Person: Mr. Gao
Tel: 0086 25 5705 3551
Durable Synthetic Lifting Slings Eye And Eye , 12 Ton Cargo Lifting Slings
LOGO Printable Polyester Lifting Slings For Construction WLL 8000kg
EN 1492-1 Standard Polyester Lifting Slings Eye And Eye Sling Brown Low Elongation
Lightweight Polyester Lifting Slings Safety Protection Sleeve Attached
Heavy Duty Tire Tie Down Ratchet Straps , Load Securing Straps With Ratchet
Wire Hooks 50mm Ratchet Tie Down Straps With Heavy Working Load Rainproof
4pc 1" X 15ft Moving Tie Down Straps Mountable Ratchet Straps 25mm Width
Rubber Handle 2 Inch Ratchet Straps With Flat Hooks Mini Tie Down Straps
Heavy Duty Polyester Webbing Tape , Commercial Custom Webbing Straps
High Tensile 1 Inch Polyester Webbing Roll For Trailer Tie Down Straps
Waterproof Sewing Polyester Webbing For Webbing Ratchet Straps Multifunctional
Orange 100 % Polyester Webbing Roll For Heavy Duty Lifting Sling