Disposable Polyester Endless Round Slings For Transporting Industry Low Elongation

Factory offer Disposable one way round Lifting made to order for lifting transporting steel tubing pipe boats bargets

Type of endless type webbing sling
1. Endless polyester webbing sling.
2. Single ply or double ply.

Technical specifications
1. Material of endless webbing slings: Polyester
2, Colour coded according to EN 1492-1.
3, Capacity stripes; Each stripe is equal to 1 tonne capacity.

Characteristics
1, Low elongation.
2, Extra strong webbing for a high abrasion resistance.
Norms
1, According to Machine Directive 2006/42/EC.

 

 
In-service Inspection, Maintenance and Replacement 
 
Inspect slings each day before use, looking for:

• Missing or unreadable ID tag
• Melted, charred or weld-splattered areas
• Acid or alkali burns
• Holes, tears, cuts, snags or embedded particles
• Broken or worn stitching
• Excessive abrasive wear or elongation
• Knots or brittle areas
• Broken, corroded, pitted distorted fittings

Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.
 
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.